Cleaning System Recommended for Your RGP Contact Lenses

Boston Advance System

Boston Advance Daily Cleaner: Removes lipid and protein deposits.

Boston Advance Conditioning Solution: Wets, Soaks, and disinfects.

Upon Removal

  1. Wash hands with warm soapy water (use Dawn liquid Dishwashing Detergent).
  2. Rub both sides of the lens with 2-4 drops of Boston Advance® Cleaner. Place the lens between your index and middle fingers and with your thumbs gently rub from the centre to the edge, making sure that you clean the entire surface.
  3. To clean the other side of the lens, turn the lens over onto your index finger and repeat the process.
  4. Remove all traces of cleaner by thoroughly rinsing with sterile saline or soft contact lens multipurpose solutions (ie, Biotrue). NEVER use water!!
  5. Put a few drops of Boston Advance Comfort Formula Conditioning Solution into the lens compartment before placing the lens into the case.
  6. Fill the case until the contact lens is covered with fresh Boston Advance Comfort Formula Conditioning Solution.
  7. Soak lenses for at least 4 hours (or overnight).

Before insertion

  1. Wash hands with warm soapy water (use Dawn)
  2. Remove lens from lens case after soaking.
  3. Rinse with sterile saline or multipurpose solution. (NEVER rinse with water!)
  4. Wet lens with fresh Boston Advance Comfort Formula Conditioning Solution for additional cushioning, if desired.
  5. Insert your lens.
  6. Clean interior of lens case thoroughly with hot water and allow to air dry. Replace your lens case with each new bottle of Boston Advance Storage Solution that you purchase.

Optimum by Lobob

A 3 step RGP Lens Care System that prevent warpage of the lens and adherence of contaminants to the lens surface.

ONLY AVAILABLE in USA.

Upon Removal

  1. Wash hands with warm soapy water (use Dawn liquid Dishwashing Detergent).
  2. Rub both sides of the lenses with 2 drops of Optimum ‘Extra Strength Cleaner’ between your index and middle fingers and with your thumbs gently rub from the centre to the edge, making sure that you clean the entire surface.
  3. To clean the other side of the lens, turn the lens over onto your index finger and repeat the process.
  4. Remove all traces of cleaner by thoroughly rinsing with sterile saline or multipurpose solutions (i.e. Biotrue). NEVER use water!!
  5. Put a few drops of Optimum Cleaning/Disinfecting/Storage Solution in the lens compartment before placing the lens into the case.
  6. Fill the lens case, so the contact lens is completely covered by Optimum Cleaning/Disinfecting/Storage Solution.
  7. Soak lenses for at least 4 hours (preferably overnight).

Before insertion

  1. Wash hands with warm soapy water (use Dawn).
  2. Remove lens from lens case after soaking.
  3. Thoroughly rinse lens with sterile saline or multipurpose solutions (i.e. Biotrue). (NEVER use water to rinse your contact lenses!)
  4. Wet lens with Optimum Wetting and Rewetting Drops.
  5. Insert your lens.
  6. Clean interior of lens case thoroughly with hot water and allow to air dry. Replace your lens case with each new bottle of Optimum Cleaning/Disinfecting/Storage Solution.

X Stat-II

It is a great RGP Cleaner that can be used in place of the Boston Advance Daily Cleaner.

It can also be paired with any multipurpose solution to form a RGP care system.

Not available in major stores; usually in stock at our office.

Upon Removal

  1. Wash hands with warm soapy water (use Dawn liquid Dishwashing Detergent).
  2. Spray each side of your contact lenses X Stat-II. Hold the lens between your index and middle fingers and with your thumbs gently rub from the centre to the edge, making sure that you clean the entire surface.
  3. To clean the other side of the lens, turn the lens over onto your index finger and repeat the process.
  4. Remove all traces of cleaner by thoroughly rinsing with soft contact lens multipurpose solutions (ie, Biotrue). NEVER use water!
  5. Put a few drops of multipurpose solution in the lens compartment before placing the lens in.
  6. Fill the case until the contact lens is covered with fresh soft contact lens multipurpose solution.
  7. Soak lenses for at least 4 hours (or overnight).

Before insertion

  1. Wash hands with warm soapy water (use Dawn)
  2. Remove lens from lens case after soaking.
  3. Rinse with multipurpose solution.
  4. Wet lens with fresh soft contact lens multipurpose solution for additional cushioning, if desired.
  5. Insert your lens.
  6. Clean interior of lens case thoroughly with hot water and allow to air dry. Replace your lens case with each new bottle of multipurpose solution that you purchase.